Painter & decorator covering Northampton and surrounding areas

Outside the house10 min readBy Dean, DH Painter & DecoratorUpdated

Exterior wood paint for windows and doors: getting a finish that lasts

How to choose the right exterior wood paint system, prepare frames properly and paint in weather that lets it last for years.

Grey painted sash windows and a blue front door in a stone surround

The exterior wood paint that lasts on windows and doors is a full matched system: primer on bare wood, a flexible exterior undercoat, then gloss or satin from the same maker. Dulux Trade claims 8 years' weathering durability for its full Weathershield system, and Sikkens up to an 8 to 10 year maintenance cycle for Rubbol XD Gloss, but only on dry, sound, well-prepared timber painted in the right weather. Paint on joinery usually fails where water gets in at joints, sills and unsealed edges.

What is the best exterior wood paint for windows and doors?

The best exterior wood paint for windows and doors is a matched system, not a single tin: a primer for bare wood, a flexible exterior undercoat, then a gloss or satin topcoat from the same maker. It needs to move with the timber and shed water. The brand matters less than the preparation underneath it and the weather on the day you paint.

Look at how the makers themselves word it. Dulux Trade says its Weathershield Exterior High Gloss gives “8 year weathering durability, when used as part of the full Weathershield exterior paint system”, which also includes a preservative primer and a flexible undercoat. Sikkens quotes a maintenance cycle of up to 8 to 10 years for Rubbol XD Gloss, again over its own primer. Those are maker claims for sound, well-prepared timber. They do not apply to one coat of gloss slapped over a cracked frame. The useful questions are what is on the wood now, what condition it is in, and which system suits it.

Water-based vs oil-based exterior wood paint

White six-panel door freshly painted, room protected with dust sheets
White six-panel door freshly painted, room protected with dust sheets

Both work outside if you use the full system. Water-based exterior paints dry in an hour or two, stay flexible, keep their colour and smell less, but they need warmer, drier weather. Solvent-based (oil or alkyd) gloss gives a harder, deeper shine and tolerates cooler days, but it dries slowly and tends to yellow and turn brittle as it ages.

The data sheets show the trade-off plainly. The water-based Weathershield Quick Dry undercoat dries in 1 to 2 hours and can be recoated in 4 to 6 hours, but must not go on below 10°C or straight after rain, fog or frost. The solvent-based Weathershield High Gloss can be applied down to 5°C (citing BS 6150) but is recoatable only after 16 to 24 hours.

Product (maker’s data)TypeRecoat timeApplication temperature
Dulux Trade Weathershield Quick Dry Exterior Flexible UndercoatWater-based4 to 6 hoursNot below 10°C
Dulux Trade Weathershield Exterior High GlossSolvent-based16 to 24 hoursNot below 5°C
Sikkens Rubbol XD GlossAlkyd (solvent)24 hours, second coat within 48 hours5°C to 30°C
Sikkens Cetol BL OpaqueWater-basedNo sooner than 6 hours8°C to 25°C

Sources: Sikkens Rubbol XD Gloss and Sikkens Cetol BL Opaque product pages, plus the Dulux Trade pages linked above.

A decorator will usually stay with what is already on the joinery. Going from old oil gloss to a water-based topcoat is possible, but it needs a thorough key and the right primer or undercoat, or the new paint can peel off the slick old film. If the old paint is sound and solvent-based, staying solvent-based is the lower-risk choice. If you are stripping back to bare wood anyway, a full water-based system is a good option.

Why does paint fail on wooden windows and doors?

Paint on exterior joinery usually fails because water gets behind it. It gets in through open joints, cracked putty, end grain on sills and bottom rails, and unpainted edges. Wet timber swells, pushes the film off, then dries and shrinks, and the cycle repeats. The topcoat often gets the blame, but it is seldom the root cause.

Sikkens states that the moisture content of the timber must not exceed 18% for exterior work. Paint a sill that is still damp from a week of rain and the film is trapping water in from day one. That matters around Northampton, where autumn mornings in the Nene valley can bring fog and heavy dew on north-facing frames.

Learn to read the failure before you choose the fix:

What you seeLikely causeWhat it needs
Flaking along joints and cornersJoint opened, water getting inScrape back, dry out, fill or re-glue, prime bare wood
Grey, bare wood on sills and bottom railsPaint gone, timber weatheredSand back to bright wood, prime, build the system up again
Soft wood that a screwdriver pushes intoWet rotCut out, harden and fill, or splice in new timber
Blisters on a south or west faceMoisture or resin under the film, heatCut out the blisters, check moisture and knots
Cracked or missing puttyOld glazing compoundRe-putty, let it skin, then paint over it
Fine cracking all over old glossBrittle, ageing filmHeavy sanding or strip, depending on depth

How to prepare exterior wood before painting

On a lasting exterior job, preparation usually takes longer than the painting. Wash, scrape off everything loose, find and repair rot, sand to a key, prime any bare wood, seal knots, then fill, putty and caulk before the undercoat. Skip any one of these and the new paint will fail at that spot first.

This is the order a decorator will normally follow when painting a house exterior:

  1. Wash down. Remove dirt, algae and grime so the paint has something sound to grip.
  2. Scrape and sand. Take off all loose and flaking paint, feather the edges, and key the sound paint.
  3. Probe for rot. Push a screwdriver into sills, bottom rails and the feet of door frames. Soft wood has to come out.
  4. Repair. Small areas can be hardened and filled. For rotten wood, Ronseal says to remove any soft wood and treat it with wood hardener before its filler goes on, and says the filler is hard enough to sand after 30 minutes. Larger areas need a timber splice from a joiner or decorator.
  5. Prime bare wood. The Weathershield system uses a water-based preservative primer that seals and preserves against water damage, decay and blue stain fungi, applied as two even coats, allowing 24 hours for the second coat to dry. Pay extra attention to end grain.
  6. Deal with resin. Highly resinous timber may need an aluminium wood primer, which Dulux Trade lists for resinous and creosoted woods. Sikkens warns that knotting is not always fully effective at sealing in resin, and adhesion of later coats may be impaired, so a decorator will usually scrape off crystallised resin first.
  7. Putty and caulk. Re-putty loose glazing and caulk gaps between frame and wall, letting each set as its maker says.
  8. Undercoat, then topcoat. Lightly de-nib between coats.

Lead paint warning. The HSE says you are most at risk when removing paint in properties built before the 1980s, stripping with blow lamps or gas torches, or dry sanding old paint. It advises only stripping paint that is flaking, chipping or a risk to children. For sound paint it advises wet abrasive paper to make a key; for paint in poor condition, chemical stripper, wet abrasive paper and on-tool extraction. On a Victorian terrace or an older ironstone cottage, treat old layers as if they contain lead unless a test says otherwise, and keep children away.

The right order to paint windows and doors

Paint opening casements first, then the frame, working from the glass outward. On a door, paint the panels and mouldings first, then the rails and stiles, then the edges and frame. Seal every face of the timber, including the top and bottom edges of a door, because unsealed edges are where water gets in.

Casement windows. Open the casement and paint its edges, then the glazing bars and the face. Carry the paint about 2 to 3 mm onto the glass so it seals the putty line, and clean the rest off with a blade once dry. Then do the frame, finishing with the sill, which takes the most weather. Leave the window wedged slightly open until the paint has hardened or it will stick shut.

Doors. Take off the letterbox, knocker and handles. Paint in the order the door is built so lap marks fall on the joints. The bottom edge is easy to forget and is often where rot starts. If the door can come off its hinges, seal it. For new joinery, Sikkens advises that where possible the first coat should be applied all round prior to fixing.

Upstairs windows mean ladders. The HSE suggests that if you would be on a leaning ladder for more than 30 minutes at a time, alternative equipment is recommended. Prepping and painting one bedroom window properly often takes longer than that, which is why many first-floor jobs go on a tower or scaffold.

When is the weather right for painting exterior wood?

Paint exterior wood when the air and the timber are above the minimum on the tin (between 5°C and 10°C for the products in the table above), the wood is dry, and there is no rain, fog or frost forecast before the paint is touch-dry. Late spring to early autumn is usually the most reliable window. Start after the morning dew has dried and finish in time for the paint to set before evening damp.

Check the data sheet, not just the weather app. Weathershield Quick Dry undercoat must not go on below 10°C, immediately after rain, fog or frost, or when these are forecast. Sikkens Cetol BL Opaque has an upper limit too: not below 8°C or above 25°C during application or drying, which Sikkens says can otherwise affect drying, appearance and durability. On a hot day, a decorator will usually follow the shade round the house. Our exterior painting calendar goes through the months in detail.

How long should exterior wood paint last?

Staircase with oak barley-twist spindles and newel post, walls painted soft cream
Staircase with oak barley-twist spindles and newel post, walls painted soft cream

Maker claims for full exterior systems on well-prepared timber run to about 8 years (Weathershield) and an 8 to 10 year maintenance cycle (Sikkens Rubbol XD). Sills, bottom rails and south or west-facing elevations take the most sun and rain, so they tend to need attention first. Regular washing and early touch-ups help the rest of the job last.

The cheapest way to make paint last is to check it every spring. Walk round the house and look at the sills, the bottom of door frames and the corners of each casement. A small crack caught early is a quick touch-up. Left for two winters, the same crack becomes a rotten sill and a joinery repair. A front door often needs attention before the windows, because it takes knocks and daily handling.

Do you need permission to repaint windows and doors?

Usually not. The Planning Portal lists repainting window and door frames among the repairs and maintenance that do not usually need planning permission. The exceptions are listed buildings, which need listed building consent for any significant works, and areas where the council has removed permitted development rights with an Article 4 direction.

This applies in parts of Northampton. West Northamptonshire Council lists heritage Article 4 directions including Abington Park, Barrack Road, Billing Road, Derngate, Kingsley and St Giles. The 2007 Abington Park direction removes permitted development rights for painting the exterior of any part of a house that fronts a highway. A change of front door colour there may need permission, so check with the council before you buy the paint. If you live near Abington and you are unsure, ask the conservation officer first.

What does it cost to have windows and doors painted?

National cost guides give rough figures only. MyJobQuote’s exterior painting guide (last updated 6 October 2026) says external door painting costs around £200, taking between 2 and 4 hours. It also quotes one painting firm advising an extra £250 per wooden window. That is a single firm’s comment, not an average, and it is a national figure.

What moves the price is almost always preparation: how much old paint has to come off, how much rot needs repairing, whether there is lead paint, and whether upstairs windows need a tower or scaffold. Two houses with the same number of windows can be very different jobs. See our guide to painter and decorator costs in Northampton for how quotes are built up. Only a quote from someone who has seen your frames gives a real figure.

Should you paint your own windows and doors or get a decorator?

DIY makes sense for a ground-floor door or a couple of windows where the paint is sound and only needs a key and two coats. Get a decorator when there is rot, flaking down to bare wood, suspected lead paint, upstairs windows, or a listed or Article 4 property.

Do the screwdriver test on every sill and bottom rail before you book anyone. Firm timber means a repaint; soft wood means repairs come first, and that moves the price more than the paint does. Dean, a painter and decorator in Northampton, will look at your frames and tell you plainly whether they need a repaint, repairs first, or a joiner. For the full picture of what we cover outside, see our exterior painting service in Northampton, or ring Dean on 07539 779 036; quotes are free and in writing.

Sources

  1. Dulux Trade Weathershield Exterior High Gloss, AkzoNobel (Dulux Trade) (accessed 2026-10-09)
  2. Dulux Trade Weathershield Quick Dry Exterior Flexible Undercoat, AkzoNobel (Dulux Trade) (accessed 2026-10-09)
  3. Dulux Trade Weathershield Preservative Primer (BP), AkzoNobel (Dulux Trade) (accessed 2026-10-09)
  4. Sikkens Rubbol XD Gloss, AkzoNobel (Sikkens) (accessed 2026-10-09)
  5. Sikkens Rubbol Primer, AkzoNobel (Sikkens) (accessed 2026-10-09)
  6. Sikkens Cetol BL Opaque, AkzoNobel (Sikkens) (accessed 2026-10-09)
  7. Dulux Trade Aluminium Wood Primer, AkzoNobel (Dulux Trade) (accessed 2026-10-09)
  8. High Performance Wood Filler, Ronseal (accessed 2026-10-09)
  9. Frequently asked questions on lead, Health and Safety Executive (accessed 2026-10-09)
  10. When and how to use ladders safely, Health and Safety Executive (accessed 2026-10-09)
  11. Doors and windows: planning permission, Planning Portal (accessed 2026-10-09)
  12. Heritage and non-heritage Article 4s and local development orders, West Northamptonshire Council (accessed 2026-10-09)
  13. Abington Park Conservation Area Article 4(2) Direction 2007, Northampton Borough Council (via West Northamptonshire Council) (accessed 2026-10-09)
  14. Cost to Paint a House (Exterior), updated October 2026, MyJobQuote (accessed 2026-10-09)

Last updated by Dean, DH Painter & Decorator.

Cloakroom WC seen through a white-painted architrave, cream walls and gloss woodwork finished Hallway with crystal chandelier and cream walls, new oak doors waiting to be hung Cloakroom with cream walls, white coving and window frame painted, ornate mirror hung Hallway with chandelier and ornate mirrors, cream walls painted and oak doors propped ready Landing decorated in white with painted spindles and handrail Entrance hall in a warm neutral with white doors, skirting and painted staircase

Exterior wood paint for windows and doors: your questions answered

Can't see your question? Call us on 07539 779 036 and we'll happily talk it through. Or see all our FAQs.

Can I paint over old gloss on exterior wood?

Yes, if the old gloss is sound. Wash it, sand it to a dull, even key and spot-prime any bare patches before the undercoat. If it is cracking all over, peeling in sheets or very thick, painting over it will not hold. It needs stripping back, ideally with wet or chemical methods if the house is older and the paint might contain lead.

How many coats does exterior wood need?

On bare timber, a typical system is primer, undercoat, then one or two topcoats, following the maker's instructions. Dulux Trade's preservative primer alone is two coats. On sound, previously painted wood in the same colour, one undercoat and one topcoat can be enough, though exposed sills and doors benefit from an extra topcoat.

Is satin or gloss better for exterior doors and windows?

Both are durable when used as part of a proper system. Gloss sheds water and dirt well and gives the traditional look on period houses. Satin hides small surface flaws better and suits modern or heritage colour schemes. On a front door, gloss is easier to wipe clean. Pick the finish you like, then stick with one maker's system.

Can I use interior wood paint outside?

It is not recommended. Interior gloss and satinwood are not made for UV, rain and the seasonal swelling of timber, so they tend to crack and fade quickly outdoors. Exterior wood paints are made to stay flexible and cope with the weather. Check the tin says exterior, and use the maker's matching exterior primer and undercoat underneath it.

What customers say about Dean

Most of our work comes from recommendations and returning customers. These are real reviews from customers after the job was finished, in their own words.

More customer reviews

Exterior decorating including fascias and soffits, rainwater pipes, stained timbers and white render prepared and decorated to a good finish, despite the intervention of storm Ciaran in the middle of the project. Dean worked quietly and tidily, using good-quality materials and appropriate access equipment.

Read full review
Customer review Exterior: fascias, soffits, pipes and render

I contacted Dean to get the outside of the house painted; the house is all roughcast render. He has done a fantastic job; the house is looking brand new. The same he did for our garage, painted our bedrooms x2, did extra jobs for us like skirtings and door frames, and painted even our gates. I could not recommend him enough; he is attentive, smiling, always on time, and nothing too much; I am so happy with what Dean has done; he went above and beyond. I have recommended him to all my friends and family.

Read full review
Customer review Roughcast render, garage, bedrooms and gates

Dean did some painting and decorating in my hallway, landing and stairs for me recently. He did an excellent job; takes great pride in his work and has good attention to detail. He is also very conscientious and reliable and I would thoroughly recommend him to others without doubt.

Customer review Hallway, stairs and landing

Start your project

Get a free painting and decorating quote

Tell us a little about the job and we'll arrange a visit to look at it properly. Quotes and advice are always free, with no obligation.

What happens next

  1. We get back to you to arrange a convenient time to visit.
  2. Free visit. We look at the job and talk through colours, finishes and any repairs.
  3. Written quote. A clear price covering preparation, materials and the finish we agreed.

Request a free quote

Please enter your name.

Please check your email address.

Please enter a valid phone number.

Prefer to talk? Call 07539 779 036. How we use your details.

Call 07539 779 036Call nowFree quote