Painter & decorator covering Northampton and surrounding areas

Damp, mould, stains and cracks10 min readBy Dean, DH Painter & DecoratorUpdated

Anti-mould paint: does it work, and when is it the wrong fix?

What the fungicide in the tin really does, how to tell condensation from a leak, and the order of work that stops mould coming back.

Intricate pattern of black mold spores on a white background

Anti-mould paint works, but only on its own surface: a fungicide in the dried film stops mould growing on the paint. It won't kill mould already in the wall or stop the moisture feeding it, so it is the wrong fix for leaks, rising damp or rain getting in. Use it as the final two coats after the cause is sorted, the mould is cleaned off and the wall is dry.

Does anti-mould paint actually work?

Yes, anti-mould paint works, but only at one job: it stops mould growing on the surface of the paint itself. It contains a fungicide that stays in the dried film. It does nothing about the moisture that feeds mould, and it can’t reach mould already in the plaster. Put it on a wall that stays wet and the mould comes back, usually on the edges and on any dirt sitting on top.

The makers say this themselves if you read the small print. Zinsser’s PermaWhite page says the paint contains a biocide “to protect the dried coating against fungal degradation”, and that once dry the film is classed as a treated article. Dulux Trade’s Mouldshield Fungicidal Matt datasheet says its fungicide “inhibits the growth of fungi and mould” and that the product is tested to BS 3900 Part G6. Inhibiting growth on the film is a real benefit. It is not a damp treatment.

The Health and Safety Executive’s guidance on treated articles explains the idea using interior paint as its example: the paint can still colour walls without its added biocide, so the paint is the product and the biocide is an extra. The same logic applies here. The fungicide protects the coating, and the room still needs dealing with.

How the fungicide works, and where it stops

Bedroom walls finished in soft neutral cream
Bedroom walls finished in soft neutral cream

Anti-mould paint carries a fungicide in the dried film that mould struggles to grow on. The two main trade products use different actives. The Dulux Trade Mouldshield datasheet names 3-iodo-2-propynyl-n-butyl carbamate (IPBC), and the PermaWhite datasheet lists DCOIT (4,5-dichloro-2-n-octyl-4-isothiazolin-3-one) at 0.12% by weight. Both protect the painted surface. Neither dries out the wall or the air.

That has three practical effects:

  • It has to be the top coat. Zinsser states plainly that painting over mould-resistant paint will prevent it from working. A coat of ordinary emulsion on top buries the fungicide.
  • It only protects what it touches. Mould on silicone, grout, window seals, the back of a wardrobe or a build-up of soap and grease on top of the paint isn’t covered. Wipe painted surfaces down now and then.
  • Coverage matters. Zinsser’s technical datasheet says two coats are required “to ensure optimum performance”. The Dulux datasheet gives “2 full coats” as the normal finishing process, allowing one coat only on sound, previously painted surfaces in a similar colour. One thin coat over a dark colour is not what either maker specifies.

When is anti-mould paint the wrong fix?

Anti-mould paint is the wrong fix whenever the wall is wet from something other than everyday condensation. Rising damp, rain getting in, a leaking pipe or a dripping shower tray will keep the plaster wet, and no paint stops that. Painting first hides the evidence, wastes the paint and lets the real fault get worse. Fix the water source, let the wall dry, then decorate.

The government’s damp and mould guidance for rented homes sets out four types: condensation (which it calls “the most common form of damp”), penetrating damp from defects in walls, roofs or windows, rising damp from the ground, and “traumatic” damp from leaking pipes, baths or burst pipes. Anti-mould paint has a sensible place with the first one only, and even then alongside better ventilation and heating. Where the mould sits on the wall is a useful first clue to which one you have.

Where the mould or mark isLikely causeIs anti-mould paint the right fix?
Black spots in the top corners of outside walls and along ceiling edges, worse in winterCondensation on cold surfacesYes, after cleaning, alongside better ventilation and steady heating
Bathroom ceiling above the shower or bathCondensation and weak extractionYes, with an extractor fan that actually clears the steam
Behind wardrobes, beds or sofas on outside wallsCondensation where air can’t movePartly. Pull furniture a few centimetres off the wall too
Around window reveals or on a chimney breast, worse after heavy rainPenetrating damp, a window seal or flashing faultNo. Fix the outside first, then let it dry
Brown tidemark low on the wall, starting at the skirtingRising damp, a bridged damp course or a leakNo. Get it investigated before any decorating
Ring-shaped brown stain on a ceiling below a bathroomA leak from pipes, the bath or the shower trayNo. Fix the leak, then stain-block and repaint
Mould back within weeks of a fresh coat of anti-mould paintMoisture level is too high for any paintStop repainting and find the moisture source

Older solid walls need extra thought. Many Victorian terraces in places like Semilong, and the older ironstone cottages in the villages around Northampton, have solid walls and sometimes lime plaster. Historic England’s redecorating advice says that in old houses it’s important to let moisture in walls evaporate so that it doesn’t cause damp, and advises seeking advice if your walls are already painted. On a damp lime-plastered wall, a tough acrylic anti-mould coating may hold moisture in rather than help. That is a case for advice before buying paint, and Historic England notes that if a home is listed or in a conservation area, consent may be required for changes.

How to use anti-mould paint: the order of work

Use anti-mould paint as the last step, not the first. Deal with the moisture, kill and remove the mould, let the wall dry right out, seal any stains or bare plaster, then apply two full coats as the finish. Common causes of early failure are painting a damp wall, skipping the mould wash, or putting a cheaper colour over the top afterwards.

This is the order a decorator will usually follow in a bathroom or a bedroom with condensation mould:

  1. Find and reduce the moisture. Check the extractor fan works, trickle vents are open and furniture isn’t jammed against outside walls. If the table above points to a leak or penetrating damp, stop here and get that fixed.
  2. Kill and remove the mould. GOV.UK says mould on hard surfaces can be removed with a suitable cleaning product and that mould and mildew products should be used in preference to bleach, for health and safety reasons. Wear gloves, eye protection and a mask. Don’t dry-brush or dry-sand mould, because that throws spores into the air.
  3. Let it dry completely. Zinsser’s datasheet gives a maximum moisture content of 16% before painting. A cheap moisture meter tells you more than touching the wall does.
  4. Scrape and repair. Remove loose or flaking paint back to a firm edge and fill. The Dulux datasheet warns that pre-1990s paint over wood and metal may contain harmful lead, so don’t dry-sand old woodwork while you are at it.
  5. Seal stains and bare plaster. Mould shadows can bleed through water-based paint. The PermaWhite datasheet advises a stain-blocking primer such as B-I-N over mould and mildew stains, and sealing bare plaster with a primer first.
  6. Two full coats, as the top coat. Brush or roller. Don’t thin it beyond the maker’s limit and don’t overcoat with ordinary emulsion.

Conditions matter in a cold bathroom. The Dulux datasheet says not to use it below 8°C. The PermaWhite datasheet asks for air and surface temperatures between 10°C and 32°C and humidity under 80%, says to wait at least 24 hours before using the shower when painting shower walls, and not to scrub the new coating for seven days. In a north-facing bathroom on a damp Nene valley morning, that can mean warming and drying the room before you start.

Is anti-mould paint safe in a family home?

Anti-mould paint is sold for home use, but it contains a biocide, so follow the label exactly. The Dulux Trade datasheet says fungicidal paints should be applied by brush or roller, not sprayed, and that unprotected people and animals should be kept away from treated areas for 48 hours or until the surfaces are dry. It also says to cover water storage tanks and remove or cover fish tanks first.

The same Dulux datasheet says not to use the product if you are under medical advice not to work with anticholinesterase compounds, because its active ingredient has weak anticholinesterase activity. Both products are for interior use. Dulux recommends its eggshell version over the matt in conditions such as some kitchens and bathrooms with heavier condensation, and the PermaWhite datasheet says it is not intended for shower enclosures, saunas or steam rooms.

The bigger safety point is the mould. GOV.UK’s guidance says damp and mould primarily affect the airways and lungs, and lists people at greater risk, including those with conditions such as asthma or COPD, people with weakened immune systems, pregnant women, children and older adults. It also says larger areas of mould should only be addressed by qualified professionals. If someone in the house has a breathing condition, don’t leave them to scrub it off.

How long does anti-mould paint last?

Bedroom in pale grey with white woodwork, French-style bed against the freshly painted wall
Bedroom in pale grey with white woodwork, French-style bed against the freshly painted wall

There is no single answer, because makers measure different things. Zinsser says the PermaWhite film is designed to resist cracking, peeling and blistering for up to 7 years. That is a durability figure for the paint, not a promise the room will stay mould-free. In practice, how long it lasts depends far more on how wet the room stays than on the tin.

A room with a working fan, steady heating and a habit of opening the window after a shower can stay clean for years. A room that runs with condensation every morning will grow mould on the frames, sealant and any grime first, and on the paint edges after that. If you are repainting the same ceiling every winter, the paint is not the thing that needs changing.

What landlords need to know about anti-mould paint

For landlords, anti-mould paint is a sensible finish for bathrooms and kitchens between tenancies, but it is not evidence that damp has been dealt with. GOV.UK’s guidance says landlords are legally responsible for addressing damp and mould, whatever the type of damp. A fresh coat of paint over an unresolved cause won’t meet that.

For social landlords in England, Awaab’s Law has applied since 27 October 2025. Landlords must investigate potential significant hazards, including damp and mould, within 10 working days of becoming aware of them, give the tenant a written summary within 3 working days of the investigation concluding, and start safety work within 5 working days of it concluding. Emergency hazards must be investigated and made safe within 24 hours.

Private landlords are covered by other rules. Councils assess hazards, including damp and mould growth, under the Housing Health and Safety Rating System set up by the Housing Act 2004, and must act on the most serious category 1 hazards. The Homes (Fitness for Human Habitation) Act 2018 requires rented homes to be fit to live in at the start of a tenancy and throughout it. Citizens Advice tells tenants it is the landlord’s responsibility to find out what is causing the damp.

The practical approach between tenancies: get the cause sorted and recorded, clean and treat the mould, then use a scrubbable anti-mould finish in the wet rooms so the next tenant can wipe it down. Our landlord and letting agent decorating work is built around that sequence. If the walls were replastered after a damp repair, the new plaster needs the right first coat too; our guide to painting new plaster covers it.

When to do it yourself and when to call a decorator

A small patch of condensation mould on a bathroom ceiling, a working fan and a dry wall is a reasonable DIY job: mould wash, stain-block, two coats of a proper anti-mould paint. Call someone in when the mould keeps returning, covers a large area, sits on a damp or tidemarked wall, or when anyone in the house has asthma or another breathing condition.

Dean has been decorating homes around Northampton for over 30 years. When he visits to quote, he looks at where the mould is and why before talking about paint, and if the cause is a leak or penetrating damp, the advice is to get that fixed first. When the cause is sorted, our interior painting service covers the cleaning, sealing and finishing. Call Dean on 07539 779 036 for a free written quote.

Sources

  1. Understanding and addressing the health risks of damp and mould in the home, GOV.UK (MHCLG and UKHSA) (accessed 2026-10-09)
  2. Awaab's Law: guidance for social landlords, timeframes for repairs in the social rented sector, GOV.UK (MHCLG) (accessed 2026-10-09)
  3. If you have damp or mould in your rented home, Citizens Advice (accessed 2026-10-09)
  4. Dulux Trade Mouldshield Fungicidal Matt technical data sheet (issued 09/25), AkzoNobel / Dulux Trade (accessed 2026-10-09)
  5. PermaWhite Matt mould resistant interior paint, Zinsser UK (accessed 2026-10-09)
  6. PermaWhite Mould Resistant Interior Paint technical datasheet, Zinsser UK (Tor Coatings) (accessed 2026-10-09)
  7. Treated articles (GB Biocidal Products Regulation), Health and Safety Executive (accessed 2026-10-09)
  8. I want to redecorate my house, Historic England (accessed 2026-10-09)
  9. Housing Health and Safety Rating System (HHSRS): landlord and agent guide, GOV.UK (MHCLG) (accessed 2026-10-09)
  10. Housing Act 2004, Part 1, legislation.gov.uk (accessed 2026-10-09)
  11. Homes (Fitness for Human Habitation) Act 2018, section 1, legislation.gov.uk (accessed 2026-10-09)

Header photo: Jessica Lewis 🦋 thepaintedsquare on Pexels. Photos of our own work appear further down the page.

Last updated by Dean, DH Painter & Decorator.

Bedroom walls painted warm cream with white coving, pink curtains and tufted headboard Staircase with oak barley-twist spindles and newel post, walls painted soft cream Cloakroom WC seen through a white-painted architrave, cream walls and gloss woodwork finished Hallway with crystal chandelier and cream walls, new oak doors waiting to be hung Landing wall painted warm cream around an oak door with white gloss architrave Cloakroom with cream walls, white coving and window frame painted, ornate mirror hung

Does anti-mould paint work?: your questions answered

Can't see your question? Call us on 07539 779 036 and we'll happily talk it through.

Can you paint over anti-mould paint with normal emulsion?

You can, but it stops the anti-mould paint doing its job. The fungicide works at the surface, so a coat of ordinary emulsion on top buries it. Zinsser says this directly about PermaWhite. If you want a colour, buy the anti-mould paint tinted instead. Zinsser says PermaWhite comes in tint bases for BS, RAL and NCS colours, and the Dulux Trade Mouldshield datasheet refers to tinted paint.

Does anti-mould paint kill existing mould?

No. It is designed to stop new mould growing on its own surface, not to treat mould already on the wall. Both Dulux and Zinsser tell you to remove and treat existing mould before painting. Use a mould and mildew cleaner rather than bleach, let the wall dry fully, and seal any stain before the anti-mould coats go on.

Is anti-mould paint the same as anti-condensation paint?

No. Anti-mould paint carries a fungicide to stop mould growing on the paint film. Anti-condensation paints make a different claim about the wall surface, so read the datasheet to see what each one actually promises. Neither takes moisture out of the air, so ventilation and steady heating still do most of the work in a damp room.

What is the best anti-mould paint for a bathroom ceiling?

Choose a trade anti-mould paint from a maker that publishes a technical datasheet, such as Zinsser PermaWhite or Dulux Trade Mouldshield, and pick a finish suited to the room. Dulux recommends its eggshell version for rooms with heavier condensation, such as some kitchens and bathrooms. Apply two full coats over a clean, dry, sealed surface, and make sure the extractor fan works.

Why has mould come back through my anti-mould paint?

Often because the room or wall is still too wet. Common reasons are a fan that doesn't clear the steam, painting before the wall dried, skipping the mould wash, one thin coat, or a hidden leak or penetrating damp. Mould returning within weeks is a sign to stop repainting and find where the moisture is coming from.

What customers say about Dean

Most of our work comes from recommendations and returning customers. These are real reviews from customers after the job was finished, in their own words.

More customer reviews

After completing my gates I was then assured Dean was more than competent to repaint the inside of my property from top to bottom. It’s a large 4 bedroom house and was done to a very high standard. Once again I would highly recommend him.

Customer review Gates, then a full four-bedroom interior

I contacted Dean to get the outside of the house painted; the house is all roughcast render. He has done a fantastic job; the house is looking brand new. The same he did for our garage, painted our bedrooms x2, did extra jobs for us like skirtings and door frames, and painted even our gates. I could not recommend him enough; he is attentive, smiling, always on time, and nothing too much; I am so happy with what Dean has done; he went above and beyond. I have recommended him to all my friends and family.

Read full review
Customer review Roughcast render, garage, bedrooms and gates

Dean did a great job for a good price i'd be very happy to recommend him always on time polite and friendly.

Customer review Painting and decorating

Start your project

Get a free painting and decorating quote

Tell us a little about the job and we'll arrange a visit to look at it properly. Quotes and advice are always free, with no obligation.

What happens next

  1. We get back to you to arrange a convenient time to visit.
  2. Free visit. We look at the job and talk through colours, finishes and any repairs.
  3. Written quote. A clear price covering preparation, materials and the finish we agreed.

Request a free quote

Please enter your name.

Please check your email address.

Please enter a valid phone number.

Prefer to talk? Call 07539 779 036. How we use your details.

Call 07539 779 036Call nowFree quote